Procedure 81 Reconfiguring A Voice Gateway Media Card Running Cs - Avaya Nortel Communication Server 1000 Manual

554 Appendix F Moving Voice Gateway Media Cards between systems
8
9
Use
1000 Release 4.0 or earlier (Leader or Follower)" (page 554)
a Voice Gateway Media Card running CS 1000 Release 4.0 or earlier
on a system running CS 1000 Release 4.5 or later, where the card was
configured as a Leader or a Follower in the original system.
Procedure 81
Reconfiguring a Voice Gateway Media Card running CS 1000 Release 4.0 or
earlier (Leader or Follower)
Step
1
2
3
4
5
6
7
Copyright © 2003–2008, Nortel Networks
.
In Element Manager, select this Voice Gateway Media Card.
Click Transfer to Selected Elements to transfer config.ini and
bootp.tab files to the card.
See "Transmit node properties" (page
Procedure 81 "Reconfiguring a Voice Gateway Media Card running CS
Action
Press the reset button on the Voice Gateway Media Card faceplate.
Access the card by the EIA232 Maintenance port.
At the prompt, to escape to BIOS VxWorks shell, enter
jkl
At the prompt, enter
nvramClear
After this command executes, the card becomes a Follower; the
Leader flag is cleared, and the IP parameters are reset to the default
values of the logon account.
Reboot the card to trigger a new BootP request. At the prompt, enter
sysReboot
After this command executes, the card has the correct IP and
accounts information synchronized with the default card. The
following user name and password is available for CS 1000 Release
4.0 and earlier: itgadmin, itgadmin
Upgrade the Voice Gateway Media Card 8051XA Controller
firmware, if necessary.
Upgrade the Voice Gateway Media Card software, if necessary.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
304).
—End—
to reconfigure