Avaya Nortel Communication Server 1000 Manual page 348

348 IP Line administration
electShow
The electShow command shows information to help a technician quickly
become familiar with the current state of the node. The command displays
a list of cards in the node and information about each card. This includes
showing all registered followers to a leader.
The output has two sections:
•
•
Registered cards
The following information is displayed for each card currently registered:
•
•
•
•
•
•
•
•
Unregistered cards
The following information is displayed for each card currently not yet
registered based on BOOTP.TAB:
•
•
•
•
•
Example
The following is an example of the output on a Signaling Server:
oam> electShow
Node ID : 678
Node Master :
Up Time :
TN : 00 00
Host Type :
IP TLAN : 47.11.215.55
IP ELAN : 47.11.216.139
Copyright © 2003–2008, Nortel Networks
.
cards currently registered
cards that are in the BOOTP.TAB configuration but not yet registered
platform
TN
ELAN network interface MAC
TLAN network interface IP Address
ELAN network interface IP Address
how long it has been registered
how many IP Phones are registered to the card
number of Time Outs
platform
TN
ELAN network interface MAC
TLAN network interface IP Address
ELAN network interface IP Address
Yes
1 days, 3 hours, 1 mins, 58 secs
ISP 1100
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008