Avaya Nortel Communication Server 1000 Manual page 470

470 Voice Gateway Media Card maintenance
IPL> command
captureSaveRemote
captureFree
Translation IP/DN commands
Table 138 "Translation IP/DN commands" (page 470)
commands to translate an IP Phone DN to its IP address and its IP address
to its DN.
For more information about Translation IP/DN commands, see Software
Input Output Reference—Maintenance (NN43001-711).
Table 138
Translation IP/DN commands
LD 117 command
PRT DNIP
<DN>
[<CustomerNo>]
PRT IPDN
<IPAddress>
Search criteria
If a customer number is entered, only that customer is searched for the
designated DN. If no customer number is entered, the database for all
customers on the system is searched.
The PRT DNIP command accepts a partially defined DN; that is, a DN
entered with only partial leading digits. For example, entering a DN of 34
with no customer number results in output for any DN in the system starting
with 34.
Copyright © 2003–2008, Nortel Networks
.
Description
FTPs the contents of the circular queue to
the specified file on the remote server.
This command does not appear on the MC
32S card.
Frees the capture queue.
This command does not appear on the MC
32S card.
Description
Prints a list of IP addresses for every IP Phone
registered with the specified DN.
This command does not appear on the MC 32S
card.
Prints a list of DNs configured for the specified
IP addresses.
This command does not appear on the MC 32S
card.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
lists the LD 117
Signaling
Server