Procedure 38 Rebooting The Voice Gateway Media Card - Avaya Nortel Communication Server 1000 Manual

312 Configuration of IP Telephony nodes using Element Manager
6
7
8
Reboot the Voice Gateway Media Card
Follow the steps in
Card" (page 312)
Procedure 38
Rebooting the Voice Gateway Media Card
Step
1
2
3
4
5
6
Copyright © 2003–2008, Nortel Networks
.
A confirmation dialog box appears.
Click OK to confirm the card upgrade.
The upgrade begins.
The Loadware Upgrade Progress window appears.
The status of the upgrade is shown for each of the cards selected
to receive the loadware upgrade. This status of the upgrade can be
Work in progress, Upgrading, Fail, or Finished.
Click OK.
Repeat steps 3 to 7 to upgrade the other card.
Procedure 38 "Rebooting the Voice Gateway Media
to reboot a Voice Gateway Media Card.
Action
Disable the Voice Gateway Media Card.
Click the Element Manager navigator, click IP Network >
Maintenance and Reports.
The Node Maintenance and Reports window appears.
To expand the node containing the card to be rebooted, click the plus
sign (+) to the left of the node.
Click the Voice Gateway Media Card associated Reset button to
reboot the card.
The cards remain in the "Disabled" state after the upgrade, so a
"Reset" command can be used. The cards can also be reset by using
a pointed object to press the Reset button on the card faceplate.
Click the card Status button in the Node Maintenance and Reports
window to verify the status of the Voice Gateway Media Card.
Use the LD 32 ENLC command to re-enable the Voice Gateway
Media Cards.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—