Avaya Nortel Communication Server 1000 Manual page 464

464 Voice Gateway Media Card maintenance
Command
isetResetAll
resetOM
lastResetReason
DSP commands
Table 132 "DSP commands" (page 464)
oam> commands applicable to the Voice Gateway Media Card. For
more information about DSP commands, see Software Input Output
Reference—Maintenance (NN43001-711).
Table 132
DSP commands
Command
DSPReset
DSPNumShow
DSPChanStateShow
DSPhwCheck
DSPLoopTest
IP Phone firmware upgrade commands
Table 133 "Upgrade commands" (page 465)
and oam> commands. For more information about IP Phone firmware
upgrade commands, see Software Input Output Reference—Maintenance
(NN43001-711).
Copyright © 2003–2008, Nortel Networks
.
Description
Resets all registered IP Phones.
Resets the operational measurement
file timer. This command resets all
operational measurement parameters
collected since last log dump.
Displays the reason for the last card
reset.
This command does not appear on the
MC 32S card.
Description
Resets the specified DSP.
Displays the number of DSPs on the Voice
Gateway Media Card.
Lists the state of all the channels on the DSPs.
Performs a basic DSP hardware diagnostic check.
Performs a DSP loopback test for all currently
inactive channels or given channels.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Signaling
Server
X
X
lists the DSP IPL> and
lists the upgrade IPL>
Signaling
Server