Procedure 84 Reconfiguring The Media Cards Running Cs 1000 Release 4.5 Or Later (Leader Or Follower) - Avaya Nortel Communication Server 1000 Manual

10
11
12
Use
Release 4.5 or later (Leader or Follower)" (page 559)
Media Card 32-port card running CS 1000 Release 4.5 or later on a system
running CS 1000 Release 4.5 or later, where the card was a Leader or
a Follower in the original system.
Procedure 84
Reconfiguring the Media Cards running CS 1000 Release 4.5 or later (Leader
or Follower)
Step
1
2
3
4
5
6
Command
->lnIsa_writeIP
->lnIsa_writeSubnetMask
->lnIsa_writeGW
Copyright © 2003–2008, Nortel Networks
.
Use Element Manager to select this Voice Gateway Media Card.
Click Transfer to Selected Elements to transfer the config.ini and
bootp.tab files to the card.
See "Transmit node properties" (page
Procedure 84 "Reconfiguring the Media Cards running CS 1000
Action
Press the reset button on the Media Card 32-port card faceplate.
Access the card by the EIA232 Maintenance port.
At the prompt, to escape to BIOS VxWorks, enter
jkl
To change the ELAN IP address configuration, the IP Telephony
application Leader flag, and the IPL> logon parameters in NVRAM,
enter
->nvramClear
The card becomes a Follower; the Leader flag is cleared, and the
IP telephony parameters are reset to the default values of the log
in account.
To set the flag so the ELAN IP address configuration data is read
from the NVRAM instead of a BootP query, enter
->lnIsaIPMethodSet 2
At the prompt, enter
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Reconfiguring the Voice Gateway Media Card 559
304).
—End—
Description
ELAN IP Address
ELAN subnet mask
ELAN Gateway IP address
to reconfigure the