Avaya Nortel Communication Server 1000 Manual page 481

CLI Command
tracePrintOff
traceFileOff
traceAllOn
tracePrintOn
traceFileOn
If no directory path is supplied with the file name specified, then the file is
written to the C:/U/trace directory on the Voice Gateway Media Cards and
to the /u/trace directory on the Signaling Server.
If no file name is given, then no trace file is generated and output is directed
to the TTY. If the file name does not meet the DOS 8.3 restriction, then the
file name is rejected and no file is generated. If the file is deleted, cannot be
found, or has a write error, then the output is directed to the TTY.
If the output for the trace cannot be determined, then the output is directed
to the TTY.
Protocol trace tool commands for the Network Connection Service
A warm boot of the system causes all tracing to cease. Traces must be reentered
after the system has restarted.
Table 143 "Protocol trace tool CLI commands for the NCS" (page
482)
Service (NCS) applicable to the Voice Gateway Media Cards. They are
issued from the OAM shell.
Copyright © 2003–2008, Nortel Networks
.
Description
Blocks all logging of information received by the
monitorLib service to the TTY output. This does
not include traces directed through the monitorLib
service to the RPT.LOG or SYSLOG.n services.
Causes the monitorLib server to stop logging to
the log files any and all trace information received
by the service. The log files include syslog.n for
the Voice Gateway Media Card and rpt.log for the
Signaling Server.
Clears the blocking of all trace information
imposed on the monitorLib service by the
traceAllOff command, the tracePrintOff
command, and the traceFileOff command. By
default, all tracing is on.
Clears only the TTY output blocking that was
imposed by the traceAllOff and tracePrintOff
commands.
Clears only the blocking of logging to files that
was imposed by the traceAllOff and traceFileOff
commands.
includes the protocol trace tool commands for the Network Connection
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
IP Line CLI commands 481
ATTENTION
Signaling
Server
X
X
X
X
X