550 Appendix F Moving Voice Gateway Media Cards Between Systems; Contents; Introduction; Reconfiguring The Voice Gateway Media Card - Avaya Nortel Communication Server 1000 Manual

Appendix F
Moving Voice Gateway Media Cards
between systems

Contents

This section contains the following topics:
•
•

Introduction

You can move a Voice Gateway Media Card to a different system, but you
may have to restore the default values of the logon account before the card
functions properly. When the card is reconfigured, security information,
accounts, and passwords are synchronized with the new Call Server.
Always attempt to install and upgrade the Voice Gateway Media Card
using Element Manager first. Use the standard installation and upgrade
procedures in Element Manager to configure the Voice Gateway Media Card
ELAN MAC address, IP address settings, IP Telephony service settings, and
Call Server Voice Gateway TNs. When the information is added, ensure the
addition of the new card successfully transferred to the Leader, which is the
current node master and BootP Server.
For information about installing and upgrading Voice Gateway Media Cards
using Element Manager, see
Element Manager" (page
Voice Gateway Media Card is removed through Element Manager from the
IP Telephony nodes of any other systems in which the Voice Gateway Media
Card was previously installed and operational.
Reconfiguring the Voice Gateway Media Card
This section explains how to reconfigure the Voice Gateway Media Card
in the following situations:
•
Copyright © 2003–2008, Nortel Networks
.
"Introduction" (page 549)
"Reconfiguring the Voice Gateway Media Card" (page 549)
The node already has the Leader configured.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
"Configuration of IP Telephony nodes using
273). Verify that the ELAN MAC address of the
549