Contents; Introduction; Replace A Voice Gateway Media Card - Avaya Nortel Communication Server 1000 Manual

Voice Gateway Media Card maintenance
using Element Manager

Contents

This section contains the following topics:
•
•
•
•
•

Introduction

This chapter provides information about the maintenance functions for the
Voice Gateway Media Card performed in Element Manager.

Replace a Voice Gateway Media Card

Replace the Voice Gateway Media Card when the card is removed or when
the following conditions occur:
•
•
•
Copyright © 2003–2008, Nortel Networks
.
"Introduction" (page 493)
"Replace a Voice Gateway Media Card" (page 493)
"Add another Voice Gateway Media Card" (page 499)
"Access CLI commands from Element Manager" (page 501)
"Access the CLI from Element Manager" (page 513)
The Voice Gateway Media Card displays a code of the form F:xx on the
faceplate LED following a reboot. This code indicates an unrecoverable
hardware failure. The card cannot register with the system. The
exception is the F:10 code, which indicates that the Security Device
is missing from the card.
The Management (ELAN) network interface or the Voice (TLAN) network
interface on the Voice Gateway Media Card has failed. This is indicated
by failing to show a link pulse on the voice IP interface status LED or on
the switch. It can also be indicated if the maintenance port continuously
prints "lnIsa0 Carrier Failure" messages after determining that the hub
or switch port and ELAN cable are good.
A voice channel on the Voice Gateway Media Card has a consistent
voice quality fault, such as persistent noise or lack of voice path, even
after resetting the card and retransmitting the card properties.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
493