Procedure 15 Replacing The Existing I/O Panel Filter Connector - Avaya Nortel Communication Server 1000 Manual

Ip line fundamentals
Hide thumbs Also See for Nortel Communication Server 1000:
Table of Contents

Advertisement

244 Installation and initial configuration of an IP Telephony node
For Small Systems, the standard I/O filter connector already supports
100BaseTX TLAN operation.
To replace an existing I/O Panel Filter Connector, follow the steps in
Procedure 15 "Replacing the existing I/O Panel Filter Connector" (page
The NTCW84JA ITG-specific Filter Connector is not required on Small
Systems.
Replace existing I/O panel filter connector
The standard I/O filter connector is shielded metal with a black plastic
insert connector. The NTCW84JA connector uses yellow warning labels
to indicate EMC filtering modifications and which MDF connection points
can support 100BaseT connections.
Procedure 15
Replacing the existing I/O Panel Filter Connector
Step
1
2
Copyright © 2003–2008, Nortel Networks
.
CAUTION
For Large systems manufactured between 1998-1999 and shipped
in North America, the IPE modules have the NT8D81BA Backplane
to I/O Panel ribbon cable assembly with a non-removable filter
connector. The NT8D81BA is compatible with a 10BaseT
operation of the TLAN network interface, but if a 100BaseT
operation of the TLAN network interface is required, order the
NT8D81AA Backplane to I/O Panel ribbon cable assembly to
replace it. Do not install the NTCW84JA ITG-specific filter
connector onto the existing non-removable filter connector.
Action
Before any of the following steps, remove the ITG pack, or any other
IPE pack, from the IPE shelf card slot corresponding to the I/O Panel
connector to be removed.
Make sure to use the I/O Panel Filter Connector which corresponds to the
left slot number of the ITG-P card.
Remove the NT8D81AA Backplane to I/O Panel ribbon cable
assembly, that is connected to the Backplane side of the existing
block, by releasing the latching pins on the filter block and pulling the
NT8D81AA cable away.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
ATTENTION
244).

Advertisement

Table of Contents
loading

Table of Contents