Maintenance Telephone; Replace The Media Card Compactflash - Avaya Nortel Communication Server 1000 Manual

Maintenance telephone

An IP Phone functions as a maintenance telephone when the CLS
is defined as MTA (Maintenance Telephone Allowed) in the Multiline
Telephone Administration program (LD 11). A maintenance telephone
enables commands to be sent to the system; however, only a subset of
the commands that can be entered from a system terminal can be used.
To access the system using the maintenance telephone, a Special Service
Prefix (SPRE) code (defined in the Customer Data Block) is entered and
followed by "91". To enter commands, press the keys that correspond to the
letters and numbers of the command (for example, to enter LD 42 return,
key in 53#42##).
The following overlays (LDs) are accessible from an IP Phone operating as
a maintenance telephone: 30, 32, 33, 34, 36, 37, 38, 41, 42, 43, 45, 46,
60, and 62.
The above maintenance overlay operations are supported on IP Phones
except for the Tone and Digit Switch (TDS) commands of LD 34 and TONE
command of LD 46.

Replace the Media Card CompactFlash

The Media Card must have the CompactFlash card installed in order to be
used as a Voice Gateway Media Card. If the CompactFlash card is removed
from the Media Card, another CompactFlash card must be installed before
using the Media Card.
If it is necessary to remove the CompactFlash card, follow the steps in
Procedure 68 "Removing the CompactFlash" (page
CompactFlash card, see
on the Media Card" (page
Procedure 68
Removing the CompactFlash
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
Procedure 13 "Installing the CompactFlash card
241).
Action
Lift the metal clip that holds the CompactFlash card in the socket on
the Voice Gateway Media Card.
Slide the card out of the socket and carefully remove the
CompactFlash card.
Return the CompactFlash card to an antistatic package.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Replace the Media Card CompactFlash 491
491). To reinstall a
—End—