Procedure 21 Configuring A Virtual Superloop In Element Manager - Avaya Nortel Communication Server 1000 Manual

260 Installation and initial configuration of an IP Telephony node
A maximum of 1000 VTN can be configured on a CS 1000M system, CS
1000M Cabinet, and CS 1000M Chassis system.
In a Small System, mapping virtual superloops to virtual cards is the same
as mapping phantom superloops to phantom cards. See
superloop/virtual card mapping for Small Systems" (page
Table 79
Virtual superloop/virtual card mapping for Small Systems
Configuring virtual superloops in Element Manager
To configure a virtual superloop in Element Manager, follow the steps in
Procedure 21 "Configuring a virtual Superloop in Element Manager" (page
260).
Procedure 21
Configuring a virtual Superloop in Element Manager
Step
1
Copyright © 2003–2008, Nortel Networks
.
SUPL
96
100
104
108
112
Action
In the Element manager navigator, click System > Core Equipment
> Superloops.
The Superloops window appears. See
virtual superloop in Element Manager" (page
Figure 57
Configuring a virtual superloop in Element Manager
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Table 79 "Virtual
260).
Card
61 to 64, 81 to 84
65 to 68, 85 to 88
69 to 72, 89 to 92
73 to 76, 93 to 96
77 to 80, 97 to 100
Figure 57 "Configuring a
260).