Procedure 43 Configuring The Temporary Ip Phone Installer Password - Avaya Nortel Communication Server 1000 Manual

342 IP Line administration
Temporary IP Phone Installer Password
A temporary IP Phone Installer Password can be configured. This enables
temporary user access to the TN for configuration. A temporary password
removes the need to distribute the administrative (node) password and then
the need to change it afterwards. If there is a null administrator password
configured and a temporary password is created, the temporary password
overrides the null administrative password.
The syntax for temporary IP Phone Installer Password specifies:
•
•
•
To configure a temporary IP Phone Installer Password, follow the steps in
Procedure 43 "Configuring the temporary IP Phone Installer Password"
(page
Procedure 43
Configuring the temporary IP Phone Installer Password
Step
1
2
3
Copyright © 2003–2008, Nortel Networks
.
the password
the number of times that the password can be entered
the time that the password is valid
342).
Action
Type nodeTempPwdSet <"password">, <uses>, <time>
at the IPL> or oam> prompt, where "password" is the temporary
password string 6 to 14 digits in length, uses is the value from 0 to
1000, and time is between 0 and 240 hours.
For example, nodeTempPwdSet "987654", 15, 3
Type nodePwdShow to see the following:
NodeID PwdEna
Timeout ======
======= ===========
987654 15
The temporary password is automatically deleted after it has been
used the defined number of times (Uses) or when the duration
expires (Timeout), whichever comes first. However, to delete the
temporary password before the number of uses or time has expired,
type the nodeTempPwdClear command at the IPL> or oam prompt.
Type nodePwdShow to verify that the temporary password has been
deleted.:
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—
Pwd TmpPwd
======= ========
123 No
0d 0h 0m 0s
Uses
========
1234567