Avaya Nortel Communication Server 1000 Manual page 398

398 IP Line administration using Element Manager
6
7
8
9
10
11
12
Delete the Leader Voice Gateway Media Card from the node
In the usual system configuration, the Signaling Server is the Leader of the
node. However, if a second or subsequent node is configured on the system,
then a Voice Gateway Media Card is configured as the Leader for that node.
Copyright © 2003–2008, Nortel Networks
.
Click Save and Transfer to save the node change.
The Edit window closes, and the Node Configuration window
appears.
Click the Transfer/Status button associated with the node containing
the card that was removed.
Click OK to confirm the transfer.
The Transfer Progress window opens and the changes are
transferred to the Call Server.
Click OK in the Progress Check Complete dialog box.
Remove the Voice Gateway Media Card.
CAUTION
CAUTION WITH ESDS DEVICES
Follow antistatic procedures and place the Voice Gateway
Media Card in an appropriate antistatic package.
Remove the Voice Gateway Media Card configuration data from
the Call Server.
a. Identify the TN of the Voice Gateway Media Card.
b. In LD 20, enter the LTN (List Terminal Number) command where
TYPE = VGW, to list the TNs on the Voice Gateway Media Card
TN. This returns a list of units equipped on the card. Verify the
number of units that are equipped on the card. Note the first unit
equipped on the card.
c. In LD 14, use the Out n command, where n equals the number
of units that are equipped on the card.
At the TN prompt, enter the TN for the first unit that was equipped
on the card. As the units are deleted, verify that the intended units
are outed.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
—End—