Avaya Nortel Communication Server 1000 Manual page 249

Install the Shielded 50-pin to Serial/ELAN/TLAN Adapter
The Media Card can support a single connector solution for access to
the TLAN and ELAN network interfaces. This connector (see
"Shielded 50-pin to Serial/ELAN/TLAN Adapter" (page
A0852632 Shielded 50-pin to Serial/ELAN/TLAN Adapter. It replaces the
single NTMF94EA ELAN, TLAN, RS-232 Serial Maintenance I/O interface
cable ('octopus' cable).
The adapter breaks out the signals from the I/O connector to the following:
•
•
•
Figure 51
Shielded 50-pin to Serial/ELAN/TLAN Adapter
On Large Systems, the NT8D81AA cable is used to bring all 24 Tip and
Ring pairs to the I/O panel. The NTCW84JA I/O panel mounting block must
be installed on Large Systems before the A0852632 Shielded 50-pin to
Serial/ELAN/TLAN Adapter is installed. See
Serial/ELAN/TLAN Adapter" (page
Copyright © 2003–2008, Nortel Networks
.
See Converging the Data Network with VoIP Fundamentals
(NN43001-260) for more information about engineering and
connecting the LAN/WAN.
ELAN network interface
TLAN network interface
one RS-232 (local console) port
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Install the hardware components 249
—End—
Figure 51 "Shielded 50-pin to
249).
Figure 51
249)) is called the