Avaya Nortel Communication Server 1000 Manual page 452

452 Voice Gateway Media Card maintenance
Command
ECNT MODL
<MMMM>
ECNT PEC <PEC>
TN
For Nortel IP Phones, there are two kinds of TN to consider:
•
•
Physical TN
Physical TN, that are seen as trunk units, are managed using existing LD 32
commands.
Virtual TN
Because virtual TN are configured on a virtual superloop, virtual TN
maintenance has no meaning; that is, what is already provided by the CS
1000 for phantom loops.
Copyright © 2003–2008, Nortel Networks
.
Description
ECNT FW <XX> <A> counts all registered IP Phones with firmware
ID equal to <XX> and major version designator equal to <A>.
ECNT FW <XX> counts all registered IP Phones with firmware ID
equal to <XX>.
ECNT FW is equivalent to ECNT FW ALL; that is, the list containing
firmware IDs and the quantity of IP Phones with this firmware ID
is printed.
Prints the number of IP Phones of specified model.
<MMMM> – specifies model name.
If this parameter is omitted, then a list of the model names and
associated mnemonics is printed.
Prints the number of IP Phones with specified PEC, where:
<PEC> – Product Engineering Code
ECNT PEC is equivalent to ECNT PEC ALL; that is, the list
containing the PECs and the quantity of IP Phones with this PEC
is printed.
physical TN – represents a physical unit of the Voice Gateway Media
Card
virtual TN – configured on a virtual superloop and represents an IP
Phone
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008