Avaya Nortel Communication Server 1000 Manual page 521

4
5
6
7
8
9
10
11
12
13
Copyright © 2003–2008, Nortel Networks
.
Add the converted cards to an IP Telephony node 521
Click the Import Node Files button.
The Import Node Files window appears.
In the box, enter the Leader Management Lan (ELAN) IP address of
the former Leader 0 of the IP Trunk node that has been converted.
Click Import.
The following text is displayed.
The BOOTP.1 and CONFIG1.INI files were retrieved from
Voice Gateway Media Card x.x.x.x.
As the BOOTP.1 file does not have a node ID, enter the node ID for
this node.
If a Signaling Server has already been installed, the Signaling
Server is the leader for this node. If IP Phones have been configured
to point to the Signaling Server node ID, use the node ID of that
Signaling Server to create this node. Add the Signaling Server to
this node in Step 8.
Enter the node ID.
Click Continue.
When the new node has been created with the imported data, the
following warning is displayed.
Warning: Call Server address in CONFIG.INI is o.o.o.o.
Please edit the node and update it.
BOOTP.TAB AND CONFIG.INI files for node yyy were
retrieved from Voice Gateway Media Card x.x.x.x.
stored on Call Server z.z.z.z.
appear
on the Node Summary page (Configuration > IP
Telephony).
In the Node Configuration window, click the Edit button for the
new node.
The Edit window appears.
Expand the LAN section by clicking the plus sign (+) to the left.
On the Edit page, in the Management LAN (ELAN) configuration
section, enter the correct IP address of the Call Server:
Add the Signaling Server (if it exists and is not already part of a
larger IP Telephony node).
Click Add next to the Signaling Server section.
Add any additional Voice Gateway Media Cards.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
The new node will
and