Avaya Nortel Communication Server 1000 Manual page 94

94 Features
Command
STIP MODL <MMMM>
RST ZONE <ZoneNumber>
RST ZONE <ZoneNumber>
<START/STOP> <HH:MM>
RST FW <FWID>
<START/STOP> <HH:MM>
Copyright © 2003–2008, Nortel Networks
.
Description
Displays information from the RLM for all IP Phones of the
specified model, where:
•
MMMM = IP Phone model
If the <MMMM> parameter is omitted, a table of existing
model names and associated mnemonics is displayed.
Immediately hard-resets all IP Phones, where:
• ZoneNumber = zone number
Schedule or cancel hard-resets of all IP Phones in specified
zone.
<ZoneNumber> – zone number in which to reset IP Phones
START/STOP – IP Phones reset, where:
• START – configures reset time schedule
• STOP – cancels scheduled reset
If START is specified and the last parameter is omitted,
then IP Phones are reset immediately.
<HH:MM> – hour and minute when IP Phones are to be
reset
With only the first parameter, or no parameters, the
schedule of IP Phones re-sets is printed.
Hard-resets all IP Phones with specified firmware ID.
<F/W ID> – firmware ID of IP Phones that should be reset
<START/STOP> – schedules or cancels IP Phones
hard-reset. If START is specified and the last parameter is
omitted, then IP Phones are reset immediately.
<HH:MM> – hour and minute when IP Phones should be
reset
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008