Avaya Nortel Communication Server 1000 Manual page 303

Transfer node configuration from Element Manager to the Voice Gateway Media Cards 303
3
4
5
6
Copyright © 2003–2008, Nortel Networks
.
•
no parity
• one stop bit
Observe the Leader card faceplate maintenance display window.
When the display reads "T:20", the card begins to send BootP
requests on the ELAN subnet. A series of dots is printed on the TTY.
Type +++ to escape from the BootP request.
At the logon prompt, enter the user ID and password to access the
IPL> or oam> CLI:
•
If the card is a new card (out of the box), then the user ID is
itgadmin and the password is itgadmin.
• If the card has been previously connected to the Call Server,
then the user ID and password are the PWD1 of the Call Server.
• If the user ID and password are forgotten, see
"Resetting the user name and password to default" (page 343)
reset the IPL> or oam> CLI Shell username and password.
When the maintenance window displays "T:21", log into the IPL>
or oam> CLI. At the prompt, enter the setLeader command to
configure the Leader Embedded LAN (ELAN) network interface IP
address, Embedded LAN gateway IP address and the Embedded
LAN subnet mask:
setLeader "xx.xx.xx.xx","yy.yy.yy.yy","zz.zz.zz.zz"
The three parameters must each be enclosed in double quotation
marks. There must be a space after the command and before the
first parameter. Put commas and no spaces between the following
parameters:
•
"xx.xx.xx.xx" = IP address
Enter the same IP address that was entered in the Embedded
LAN IP address field for Leader in the Cards menu of the Edit
window.
• "yy.yy.yy.yy" = Gateway IP address.
Enter the same IP address that was entered in the Embedded
LAN gateway IP address field in the Node menu of the Edit
window. If there is none, enter the following: "0.0.0.0"
• "zz.zz.zz.zz" = Management LAN subnet mask.
Enter the same address that was entered in the Embedded LAN
subnet mask field Node menu of the Edit window.
This step assumes that the new IP Telephony node has already
been configured in Element Manager.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Procedure 44
to