Figure 34 "isetNATShow sample output" (page 129)
Figure 34
isetNATShow sample output
The command "isetShow" and "isetNATShow" can display the information
about an IP Phone based on IP or TN. The "IP" is the Public IP address
used for signaling. If "isetShow" or "isetNATShow" is typed with a Public
IP address used by multiple IP Phones, then all those IP Phones are
displayed, even if the IP Phones are registered to different cards. Therefore,
the "isetShow" and "isetNATShow" now display the information similar to
the following example:
Signaling....
Public...
(Private...
----
->Found on Card TN 009-00, ELAN IP....
47.11.217.102....
Notice how the "Found on" line is below the title, and is displayed before
every IP Phone.
Copyright © 2003–2008, Nortel Networks
.
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
NAT Traversal feature 129
shows a sample output.