Avaya Nortel Communication Server 1000 Manual page 471

PRT DNIP output
The PRT DNIP command generally produces the following output:
•
•
If the IP Phone is behind a NAT device, the public IP address is displayed,
with the private IP address underneath in parenthesis.
PRT IPDN
The PRT IPDN command produces the following output:
•
•
•
If the IP Phone is behind a NAT device, the public IP address is displayed,
followed by the private IP address in parenthesis.
An example of the output is shown in
output" (page
Copyright © 2003–2008, Nortel Networks
.
an initial line displaying the DN and customer number. If there is output
for multiple customers, this line is repeated before each customer output.
information for each occurrence of the DN on any IP Phone for that
customer.
— TN
— set type
— key number of DN appearance and type of DN
— current IP address of the IP Phone
— configured zone for the IP Phone
— state of the IP Phone registration
an initial line displaying the IP address for the search
a second line displaying the customer number, TN, set type, zone and
registration status of the IP Phone using the specified IP address
information for all DNs configured on that IP Phone
— key number of DN appearance and type of DN
— DN
— configured CPDN for the DN
472).
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
IP Line CLI commands 471
"LD 117 PRT IPDN and PRT DNIP