Procedure 47 Backing Up The Call Server Data - Avaya Nortel Communication Server 1000 Manual

388 IP Line administration using Element Manager
If a node is removed, the associated files are also removed. For every
node that is created, a nodeyyyy.btp and nodeyyyy.cfg file are created in
the C:/u/db/node directory.
Backup
The Backup command invokes the Equipment Data Dump (EDD) operation
on the Call Server to back up all Call Server data. Within Element Manager,
the Call Server Backup function invokes a data dump and writes the Call
Server data to the primary and internal backup drives.
The backup includes all Call Server data as well as the BOOTP.TAB and
CONFIG.INI files for each node configured in the system. These files are
stored on the Call Server for the IP Telephony nodes configured in the
system.
This Backup function can also be performed on the Call Server by entering
the EDD CLI command using LD 43.
During the Backup function, the BOOTP.TAB and CONFIG.INI files of all
registered nodes are copied so that they can be restored in case of system
failure.
Follow the steps in
388)
Procedure 47
Backing up the Call Server data
Step
1
Copyright © 2003–2008, Nortel Networks
.
WARNING
Do not manually edit or delete the node files. Manually editing or
deleting these files can cause corruption of Element Manager.
Procedure 47 "Backing up the Call Server data" (page
to back up the Call Server.
Action
In the Element Manager navigator, click Tools > Backup and
Restore > Call Server Backup and Restore. See
Server Backup and Restore window" (page
Nortel Communication Server 1000
IP Line Fundamentals
NN43100-500 02.02 Standard
Release 5.5 4 February 2008
Figure 87 "Call
389).