Basic Operational Timing; Overview; On-Chip Memory Access Timing - Hitachi H8/3048 Hardware Manual

2.9 Basic Operational Timing

www.DataSheet4U.com

2.9.1 Overview

The H8/300H CPU operates according to the system clock (ø). The interval from one rise of the
system clock to the next rise is referred to as a "state." A memory cycle or bus cycle consists of
two or three states. The CPU uses different methods to access on-chip memory, the on-chip
supporting modules, and the external address space. Access to the external address space can be
controlled by the bus controller.

2.9.2 On-Chip Memory Access Timing

On-chip memory is accessed in two states. The data bus is 16 bits wide, permitting both byte and
word access. Figure 2-15 shows the on-chip memory access cycle. Figure 2-16 indicates the pin
states.
ø
Internal address bus
Internal read signal
Internal data bus
(read access)
Internal write signal
Internal data bus
(write access)
T state
1
Figure 2-15 On-Chip Memory Access Cycle
51
Bus cycle
T state
2
Address
Read data
Write data