Table of Contents
Advertisement
Bit 3—Data Transfer Interrupt Enable (DTIE): Enables or disables the CPU interrupt (DEND)
requested when the DTE bit is cleared to 0.
www.DataSheet4U.com
Bit 3
DTIE
Description
0
The DEND interrupt requested by DTE is disabled
1
The DEND interrupt requested by DTE is enabled
Bits 2 and 1—Data Transfer Select 2A and 1A (DTS2A, DTS1A): A channel operates in full
address mode when DTS2A and DTS1A are both set to 1.
Bit 0—Data Transfer Select 0A (DTS0A): Selects normal mode or block transfer mode.
Bit 0
DTS0A
Description
0
Normal mode
1
Block transfer mode
Operations in these modes are described in sections 8.4.5, Normal Mode, and 8.4.6, Block
Transfer Mode.
201
(Initial value)
(Initial value)
Advertisement
Table of Contents
