Firmware Error 024-340 - Xerox Phaser 6000 Service Manual

Firmware Error 024-340

Phaser 6000/6010 and WC 6015 MFP
A firmware error has occurred.
Applicable Error
• 024-340: Firmware Error
Initial Actions
• Cycle printer power.
• If the problem persists, use the following procedure.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL7.2.2
Troubleshooting Procedure Table
Step Actions and Questions
1 Replace the MCU Board
(page 8-121).
Does the error persist?
Xerox Internal Use Only
Error Messages and Codes
Wiring and Plug/Jack Map References
"Phaser 6000/6010 System Wiring" on
page 10-10
"WorkCentre 6015 MFP System Wiring"
on page 10-24
Yes
Perform the
Electrical Noise
check
(page 4-66).
No
Complete.
3-49