System Errors; Paper Mismatch - Xerox Phaser 3330 Service Manual

System Errors

Paper Mismatch

The media mismatch in Tray 1, 2 or Bypasss.
Applicable Error
• 03-410: Tray 1 Paper mismatch
• 03-420: Tray 2 Paper mismatch
• 03-450: Bypass Tray Paper mismatch
Initial Actions
• Load the correct media in the source tray.
• Check paper settings for the affected tray and print driver.
• Check tray guide settings.
• If problem persists use the following procedure.
Troubleshooting Reference Table
Applicable Parts
• Main PWB: Phaser 3330 (PL 1.0.7,
List 1.0 Phaser 3330
3335 and 3345 (PL 6.1.7,
WorkCentre 3335/3345
Troubleshooting Procedure Table
Step Actions and Questions
1. Enter dC330 Component
08-100 to check the Feed Sensor (PL
3.1A.20, Parts List 3.1A Frame (2 of
Does the sensor work correctly?
2. Install a new Main PWB:
• Phaser 3330 (PL 1.0.7,
Phaser 3330
• WorkCentre 3335 and 3345 (PL 6.1.7,
Parts List 6.1 WorkCentre 3335/3345
Main).
Xerox Internal Use Only
Wiring and Plug/Jack Map Reference
Parts • Phaser 3330 Main PWB Connector Designators
Main), WorkCentre
• Phaser 3330 Control Panel PWB
Parts List 6.1
• Wiring Diagrams for P3330/WC3335/WC3345
Main).
• WorkCentre 3335/3345 Main PWB Connector Designators
• DADF PWB
• SMPS PWB
Control, code
2)).
Parts List 1.0
Main)
Yes
Go to step 2.
Complete.
Phaser 3330 and WorkCentre 3335/3345
Troubleshooting
No
Istall a new Feed Sensor
(PL 3.1A.20, Parts List
3.1A Frame (2 of 2)).
-
2-77
Service Manual