Patient Positioning For 3D Imaging - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

6.4.4 Patient positioning for 3D imaging

NOTICE! The device can be used to take images of both standing and seated
patients. It is recommended to have very tall patients seated for easier
positioning.
1. Press HOME button on the patient positioning panel. The device moves to HOME
(Patient-In) position.
NOTICE! Make sure that the device is set up correctly for the intended
examination.
2. The device goes to ready state and the status indicator light turns green.
NOTICE! If the status indicator light does not turn green, look for more
information on the GUI.
3. Select the patient positioning accessory according to the image to be taken, attach it
to the chin rest and attach them on the lower shelf of the device, as shown below.
NOTICE! The Chin Rest has magnets to keep it in place.
NOTICE! The Chin Rest needs to be attached to the device in the correct
orientation for the selected imaging program before the device allows images
to be taken.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
Lower jaw or both jaws
Lip Support + Chin Rest
™
OP 3D
6 Using the device
Upper jaw
Lip Support + Chin Rest
59
D519207, 19