KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 98

9 Installation
7. Loosen the 3 carriage locking bolts on top of the column and ensure that they are
facing outwards.
8. Push the carriage installation rail into the slot on the column. The rail locks itself into
the slot.
9. Lift the carriage onto the column using the installation rail as a hinge and by lifting
from the cutouts in the plywood support.
NOTICE! The liftable weight of the carriage corresponds to approximately 55
kg and lifting it on the column may require two persons.
NOTICE! Ensure that nothing gets caught between the carriage and the
column.
NOTICE! A latch locks the carriage in place when it is lifted on to the column.
98
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D