9 Installation
9.4.2 Carriage installation
1. Turn the taped edge of the cardboard tray down to allow the carriage to be pulled off
the pallet.
2. Pull the carriage to the edge of the pallet so that the diagonal sections of the
plywood supports are outside of the pallet.
3. Flip the carriage 90° to the floor so that it stands in upright position using the
cutouts in the plywood as handles.
96
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D