Programs; Fov Sizes - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

5.3 3D programs
NOTICE! These programs are available only for 3D devices.
Always select the smallest feasible FOV size, resolution and imaging parameters for the
3D image in order to follow the ALARA (As Low As Reasonably Achievable) principle.
NOTICE! It is always up to the dental professional to select the appropriate FOV,
resolution and imaging parameters.

5.3.1 FOV Sizes

The indicated FOV sizes are Height x Diameter of the volume in centimeters. For
example FOV 5 x 5 corresponds to a cylindrical volume with diameter of 5 cm and height
of 5 cm.
NOTICE! Fine adjustment of the FOV location and FOV height can be done using
the scout images. The location of the FOV is determined by the selected ROI.
FOV 5 x 5
Optimized for single site implants or localized diagnostics, for example, 3rd
molar extractions, impacted teeth, periodontal cases, root fractures, single
TMJ analysis, endodontics and for pediatric imaging.
FOV 6 x 9
Optimized for multiple implant placement using surgical guides, imaging the
whole dental arc of one jaw, 3rd molar visualization, pathology (bilateral
analysis) and periodontal cases.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
Available resolutions:
Resolution optimized for endodontic imaging:
Available resolutions:
™
OP 3D
LDT (Low Dose Technology
Standard resolution
High resolution
Endo resolution
LDT (Low Dose Technology
Standard resolution
High resolution
5 Imaging programs
™
) resolution
™
) resolution
D519207, 19
43