KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 172

9 Installation
12. Loosen the 3 locking screws holding the carriage on the column and turn them
outwards.
13. Carefully push the latch inside the carriage with a flat tool to release the carriage and
carefully lower it to the floor.
NOTICE! This step requires at least 2 persons.
NOTICE! It is recommended to place packing foam or similar on the floor to
prevent any damage to the carriage or the floor.
14. Detach the carriage from the column, detach the column from the wall and floor and
move the carriage and the column onto a transportation pallet.
172
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D