KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 88

9 Installation
6. Lift and set the column standing to the installation location.
NOTICE! Use spirit level to ensure that the wall and floor of the chosen
installation location are straight enough to allow the device to be installed
vertically straight.
7. Take the the wall bracket, suitable for the device configuration, from the device
package.
8. Detach the wall bracket cover plate held in place with 2 screws.
88
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
PAN/3D DEVICE
Wall bracket is located in
the device column box
PAN/3D wall bracket
CEPH DEVICE
Wall bracket is located in the
cephalometric unit package
CEPH wall bracket
ORTHOPANTOMOGRAPH
™
OP 3D
D519207, 19