View - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

4.1.4 3D view
4.1.4.1 3D imaging program selection
ORTHOselect
Dental chart is used to select the Region of Interest (ROI) for the 3D scan.
The FOV changes automatically according to the selections.
Press teeth, jaw and TMJ icons to select which parts of the dentition are studied:
• Single tooth (1)
• Range of teeth (2)
• One jaw and all teeth in it (3 or 4)
• Both jaws and all teeth in them (3 and 4)
• TMJ (5 or 6)
• Both TMJ's (5 and 6)
• Whole dentition (3, 4, 5 and 6)
NOTICE! Both TMJs are selectable only if 9x14 FOV size is available.
You can select all parts of the dentition by double-clicking any single selection (tooth,
jaw or TMJ). Undo the "select all" by double-clicking the selection to return to the
previous state.
Clear all selections by clicking the gray area on the lower corners of the dental chart.
Undo the "clear all" by double-clicking the gray area to return to the previous state.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
dental chart
™
OP 3D
4 User Interfaces
27
D519207, 19