Introduction; Orthopantomograph Op 3D - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

2 Introduction

2.1 ORTHOPANTOMOGRAPH
The ORTHOPANTOMOGRAPH
producing high quality digital images of dentition, TM-joints, head and neck area and
carpus. To take images, you need a suitable workstation connected to the device and a
dental imaging software to capture and manage the images.
The ORTHOPANTOMOGRAPH
on the device configuration and country-specific regulatory approvals:
Panoramic Imaging
• Standard Panoramic
• Segmented Panoramic
• Pediatric Panoramic
• Bitewing
• TMJ, lateral projection
Cephalometric Imaging
• Cephalometric lateral projection
• Cephalometric pediatric lateral projection
• Cephalometric Posterior-Anterior (PA) projection
• Carpus view
3D CBCT Imaging
• FOV (Volume Height x Diameter)
• 5 x 5
• 6 x 9
• 9 x 11
• 9 x 14
• Resolution
• Low Dose Technology
• Standard
• High
• Endo (5 x 5 only)
• Scout images for FOV position and height verification
NOTICE! This manual describes the use of a device with all available functions
and so may contain instructions to more functions than what are available with
your device configuration.
CAUTION! USA only: Federal law restricts this device to sale by or on the order
of a dentist or other qualified professional.
To function, the device requires an additional workstation with MDD approved dental
imaging software. All softwares used with the device must conform to the MDD and the
relevant legal requirements in the USA. The workstation must conform to all the device
and dental imaging software requirements.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D (later called device) is a dental X-ray device
™
OP 3D can be used for the following procedures depending
™
(LDT)
™
OP 3D
™
OP 3D
2 Introduction
7
D519207, 19