KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 30

4 User Interfaces
FOV position adjustment
Brightness slider
Contrast slider
OK button
30
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
You can adjust the position of the FOV, according to the scout
image, by sliding the adjustment icons left or right on the scale. The
left slider adjusts the FOV position in Posterior (P) - Anterior (A)
direction and the right slider in Left (L) - Right (R) direction.
You can also click and drag sideways on the image to adjust the FOV
position.
It's recommended to adjust the FOV location so that the ROI is in
the middle of the volume.
NOTICE! FOV diameter can be also changed using the FOV
size icon.
You can adjust the brightness of the shown Scout image using the
brightness slider.
NOTICE! Adjustment is not saved to the image.
You can adjust the contrast of the shown Scout image using the
contrast slider.
NOTICE! Adjustment is not saved to the image.
Press OK button to approve the changes made to the FOV location
and size using the Scout image and to proceed to the 3D exposure.
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D