9 Installation
9.11.5 2D Sensor adjustments
9.11.5.1 Removing the 2D sensor covers
The cover removal and installation process for 2D sensor varies between device
configurations. Follow the instructions applicable to the installed device.
2D ONLY DEVICES
1. Detach the 2D sensor cover screw.
2. Pull the sensor collar halves apart to detach them from the sensor.
3D DEVICES
1. Pull the 2D sensor collar cover downwards.
182
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D