KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 105

5. Take the straight CEPH arm with the tubehead from the package by lifting it from the
handle attached to the tubehead.
6. Unwrap the film holding the tubehead cable bundle in place.
7. Loosen the 2 screws at the end of the straight CEPH arm to the level of the markings
on the arm (approximately 15 mm / 0.6 in).
8. Slide the straight CEPH arm against the curved arm in an angle.
NOTICE! The guides in the straight CEPH arm slide into the curved CEPH
arm.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D
9 Installation
105
D519207, 19