9 Installation
9.10 Additional installation procedures
9.10.1 Device settings
The device settings can be changed if required during the installation or service. The
user has few device settings that can be accessed through the Settings menu, but the
device may be configured more by unlocking more device settings through the Service
mode menu.
1. Go to device settings.
2. Select Service mode menu and enter PIN code 0612.
3. Select Settings menu and adjust the device settings.
158
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D