KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 35

3. SETTINGS
Device settings:
Friendly name
3D Metal Artefact
Reduction
(3D devices only)
Force device
language
Default to Scout
before 3D
(3D devices only)
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
Set a name for the device, which is shown next to the
device settings icon and on the imaging software.
Enable or disable MAR, Metal Artefact Reduction. MAR
is used to reduce the effect of metals and other dense
radiopaque objects on the 3D image.
It is recommended to keep MAR activated.
Change the language of the device GUI if needed.
It is recommended not to force the language of
the GUI but change the language profile of the
workstation.
Enable or disable automatic Scout image activation
when a 3D imaging modality is selected. It is
recommended to have the Scout image taking enabled.
™
OP 3D
NOTICE! If the selection is set to "disabled",
a Scout image mode can still be activated
manually in the 3D imaging program selection
view.
4 User Interfaces
35
D519207, 19