KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 193

11. Re-install the detached covers.
NOTICE! Remember to press the lower head support cover back against the
upper cover to re-attach it.
9.11.7.3 Ear rod tilt adjustment
1. Move the nasion support and ear rods to their outmost position.
2. Remove the head support mount top cover screws (2 pcs) and detach the cover.
3. Remove the screws (3 pcs) from the upper head support cover.
4. Pull the lower head support cover downwards from the ear rod slide openings to
detach it from the upper cover.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D
9 Installation
193
D519207, 19