KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 49

3. Select the patient positioning accessory according to the image to be taken, attach it
to the chin rest and place them on the lower shelf of the device, as shown below.
Standard and Pediatric
panoramic and
Bitewing imaging
for dentate patients
Bite Block + Chin Rest
NOTICE! The Chin Rest has magnets to keep it in place.
NOTICE! The Chin Rest needs to be attached to the device in the correct
orientation for the selected imaging program before the device allows images
to be taken.
4. Place disposable covers on the patient positioning accessories.
5. Adjust the device's height to approximately match the patient's height by sliding a
finger on the carriage up/down slider.
6. Open the head support locking lever on the lower shelf, push the head support
towards the mirror and lock it leaning forward.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
Standard and Pediatric
Lip Support + Chin Rest
™
OP 3D
panoramic and
Bitewing imaging for
edentulous patients
6 Using the device
TMJ imaging
Lip Support + Chin Rest
D519207, 19
49