Operating The Foot Switch; General Functions; Positioning The Patient Chair With The Foot Control; Preselect Dentist - KaVo Primus 1058 Life TM Instructions For Use Manual

Instructions for use Primus 1058 Life
4 Operation | 4.9 Operating the foot switch

4.9 Operating the foot switch

4.9.1 General functions

The footswitches of the foot control have two functions. The function of the con-
trol depends on whether an instrument is in its holder or whether it has been
removed.
See also:
2 Foot control

4.9.2 Positioning the patient chair with the foot control

See also:
2 Automatic positioning of patient chair
2 Position the dental chair using the button cross or 4-way switch

4.9.3 Preselect dentist

Requirement
All instruments are in their holder.
▶ Hold down the foot pedal and press the stirrup switch.
ð
Each time the stirrup switch is pressed, the selection advances to the next
dentist (dentist 1 to 2).

4.9.4 Start and regulate instruments

▶ Remove the handpiece (such as turbine, motor) from the holder.
ð
The handpiece is active.
▶ Press the foot pedal.
ð
The removed handpiece runs at the set speed or intensity.
▶ Changing speed or intensity with the foot pedal.
ð
The left stop corresponds to the minimum speed/intensity.
ð
The right stop corresponds to the maximum speed/intensity.
82 / 126