KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 191

6. Verify the correct ear rod assembly alignment by performing the CEPH position
calibration.
7. Re-install the detached cover.
9.11.7.2 Ear rod height adjustment
1. Move the nasion support and ear rods to their outmost position.
2. Remove the head support mount top cover screws (2 pcs) and detach the cover.
3. Remove the screws (3 pcs) from the upper head support cover.
4. Pull the lower head support cover downwards from the ear rod slide openings to
detach it from the upper cover.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D
9 Installation
191
D519207, 19