Ph Balancer; Patient Kit - KaVo HealOzone 2130 C Instructions For Use Manual

Instructions for use HealOzone 2130 C
|
3 Product description 3.5 Purpose and Applications
The HealOzone unit required high voltage to generate ozone from the air that has
been previously guided through the air drier ③. A vacuum conducts the ozone
through the handpiece into the silicone cap. The the ozone is drawn out of the sili‐
cone cap and led through an ozone neutraliser ⑤ that converts the ozone into
oxygen. A liquid pH balancer is subsequently applied.

3.5.1 pH balancer

Cut off the tip of the pH balancer ampoule Mat. no. 1.002.3718, apply a few drops
on the site treated with ozone, and then let it act for 10 seconds. The pH balancer
contains citric acid for conditioning the surface and creating the optimum pH. This
prepares the surface for applying the fluoride that is another ingredient. Xylitol, ano‐
ther ingredient, has a bactericidal effect.
1

3.5.2 Patient Kit

To encourage remineralisation, there is a Patient Kit ⑪ Mat. no. 1.002.1547 for
patients to use at home.
22/57