Emergency Stop Switch - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

3 Overview

3.5 Emergency stop switch

An emergency stop switch is located on the left side of the carriage.
Pressing the emergency stop switch immediately terminates the imaging and all device
movements.
NOTICE! An interrupted imaging process cannot be resumed. A new image needs
to be taken.
To release the emergency stop switch, rotate it clockwise.
NOTICE! Make sure that the emergency stop switch is not pressed down when
you start the imaging process.
The Graphical User Interface (GUI) has indication if the emergency stop is active and the
device status indication lights are blue.
NOTICE! Activating the emergency stop causes the device to restart.
18
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D