KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 91

12. Push the wall bracket arm to the column side bracket.
13. Insert the previoustly detached wall bracket arm pivot screw to the adjustment
block.
14. Screw the wall bracket arm pivot screw to the wall bracket arm. Leave the screw
slightly loose to allow the adjustment of the wall bracket angle later on.
NOTICE! If the wall bracket adjustment block is tilted, straighten it before
screwing in the arm pivot screw.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
PAN/3D wall bracket
™
OP 3D
CEPH wall bracket
9 Installation
91
D519207, 19