KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 102

9 Installation
18. Detach the rotating unit support from the carriage (4 screws), push the rotating unit
outwards a bit and lift the support off from the rotating unit.
NOTICE! You may also move the rotating unit outwards by turning the linear
movement screw on the upper shelf by hand.
NOTICE! The rotating unit can now move freely, ensure that it does not hit
the lower shelf.
19. Detach the 2 screws holding the front support bar in place, push it inside the upper
shelf frame and reattach it.
102
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D