User Interfaces; Graphical User Interface (Gui); Gui Overview - KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual

4 User Interfaces

4.1 Graphical User Interface (GUI)

4.1.1 GUI Overview

1. Selected patient name and Patient Identification (ID).
2. Selection of imaging modality, PAN, CEPH or 3D.
3. Selection of imaging program.
4. Main view area. Shows a dental chart for the selected modality and previews of the
taken images.
5. Status message bar and device status indicator.
6. Imaging parameters. Imaging parameters, kV and mA, can be manually adjusted
according to the patient size and skull anatomy using the - and + icons.
7. Sample image of the selected program or 3D FOV size and location illustration.
8. Exposure time and DAP display. Shows the duration of X-ray radiation and the
radiation dose with the selected imaging program and parameters. The actual
imaging parameters and DAP are shown after imaging.
9. Device settings and friendly name of the device. Pressing the cogwheel symbol opens
a menu which is used to access the device settings, quality control and calibration
programs and to show the device information, like serial number and software
versions.
NOTICE! The available imaging modalities vary depending on the device
configuration.
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
™
OP 3D
4 User Interfaces
19
D519207, 19