KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 104

9 Installation
2. Take the curved CEPH arm with the head support from the package and hang it to
the CEPH arm flange by the large pin.
NOTICE! If the device is installed in a tight space and the column has been
attached to the floor only with the pivoting screw, you may loosen the wall
bracket screws and rotate the device to a more suitable position for the CEPH
arm installation.
3. Attach the CEPH arm in place with 4 bolts (M8x16) and washers. Do not tighten the
bolts fully yet.
4. Attach the CEPH arm leveling bolt (M8x16) to the CEPH arm flange.
104
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
ORTHOPANTOMOGRAPH
D519207, 19
™
OP 3D