KaVo ORTHOPANTOMOGRAPH OP 3D User And Installation Manual page 29

Scout image program
4.1.4.2 SMARTVIEW
FOV height adjustment
ORTHOPANTOMOGRAPH
Reviewed Suuronen Esa 2019-09-19 12:21
Approved Lassinen Juuso 2019-10-02 14:37
Indicates if the Scout image program is active.
A Scout image is taken to verify and perform adjustment to the FOV
position and height before initiating a full 3D scan. By default, the
Scout image is always active when taking 3D images.
Press the Scout image icon to deactivate/activate it.
When the Scout image program is active, the FOV coverage
illustration turns green.
™ 2.0 scout image view
You can adjust the height of the FOV, according the scout image, by
sliding the height adjustment icon up or down.
It's recommended to adjust the FOV size so that the ROI is in the
middle of the volume.
™
OP 3D
4 User Interfaces
29
D519207, 19